Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-8-35 COM Port Baud Rate Setting
Assignment
General Description
Use this Memory Block to specify the baud rates for individual COM ports.
Display
Settings
Data
No.
LK 1 LK 2 LK 3 LK 4 The shaded selection is the
default. Baud Rates are in
4.8 9.6 19.2 38.4
Kbps.
Programming Procedures
1 Go off-line.
2 Press LK1 + LK8 + CE to access the Memory Block.
3 Press the corresponding CO/PBX line key to select the baud rate for each COM port. Default Values
4 Press G to write the data, and advance to the next COM port.
5 Repeat steps 3 and 4 for each remaining COM port. The next Memory Block is displayed.
6 Program next Memory Block or press E to go back on-line.
Related Programming
Title
M.B. Number Memory Block Name
1-5-13 Printer Connected Selection
Setting
Data
5 : B D R T 1 = 3 8 . 4
3 5 : B D R T 1 = 3 8 . 4
3
I M E D I S P L A Y
T I M E D I S P L A Y
T
COM 1 = PC Programming
COM 1 = LCR
COM 2 = Station Message Detail Recording (SMDR)
COM 3 = Automatic Call Distribution [Not used by Electra Elite IPK Basic Port Package (48).]
� Notes �
COM 1 = 38.4
COM 2 = 4.8
COM 3 = 9.6
System Mode
1
Submode
8
Data No.
35
PC Programming
�+CSS
___________________________________________________________________________________
2 - 244 Memory Blocks