Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-1-34 Tie Line First Ring Pattern Selection
General Description
Use this Memory Block to set a specific ringing pattern for incoming calls on Tie lines.
After a delay interval specified in Memory Block 1-1-07 (Tie Line Delay Ringing Time
Selection), a Tie call can ring at all Day/Night ring-assigned telephones using a
different cadence.
Display
Settings
Data
No.
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
PAT1 PAT2 PAT3 PAT4 ICM VOICE
default.
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 + CDto access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
4 Press G to write the data and display the next Memory Block.
5 Program the next Memory Block or press E to go back on-line.
Related Programming
Title
M.B. Number Memory Block Name
Setting
Data
3 4 : T L I R N G P A T 3
T I M E D I S P L A Y
1-1-07 Tie Line Delay Ringing Time Selection
1-1-53 Tie Line Delay Ring Pattern Selection
4-01 CO/PBX Ring Assignment (Day Mode)
4-02 CO/PBX Ring Assignment (Night Mode)
1. Specify one pattern in the Ringing Pattern Selection Table.
� Notes �
System Mode
1
Submode
1
Data No.
34
PC Programming
�+ALN
2. When Voice is selected, switching from voice to tone is not allowed, Memory Block 1-1-07 (Tie Line Delay
Ringing Time Selection) is not used, and Handsfree Answerback is not allowed at the receiving station.
___________________________________________________________________________________
2 - 46 Memory Blocks