Electra Elite IPK Programming Manual - Southwestern Telephone ...

Electra Elite IPK Document Revision 4
___________________________________________________________________________________
7-3-01 MIF (LCR) Assignment
General Description
Use this Memory Block to enable the Least Cost Routing (LCR) function of the
MIFM-U10/20 ETU and the SPE(M)-U( ) ETU.
Display
Programming Procedures
1 Go off-line.
Data
Title
No.
2 Press LK7 + LK3 +JA to access the Memory Block.
3 Use the dial pad to enter data.
Use the following to enter data:
�
Jto move the cursor left
Lto move the cursor right
K~Ito enter numeric data
Setting Data: 00, 01, 02
�
4 Press G to write the data.
5 Press E to go back on-line.
Setting
Data
0 1 : L C R M I F = 0 0
T I M E D I S P L A Y
1. The LCR feature requires a KMM(1.0)U to be installed on the MIFM-U10 ETU.
Default Value
� Notes �
2. The LCR feature requires a KMM-U20 to be installed on the MIFM-U20 ETU.
No Assignment (00)
ETU Mode
7
___________________________________________________________________________________
Programming Manual 2 - 637
MIF
3
Data No.
01
PC Programming
�+BS