Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Electra Elite IPK Document Revision 4
Display (R3000 or higher)
Data
No.
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 +KCto access the Memory Block.
3 Use the dial pad to enter the Data Setting for Class 1.
Setting Data
000s~255s (e.g., 045s = 45s)
4 Press G to write the data and display the next Timer Class of Service.
5 Program the next Timer Class of Service or press E to go back on-line.
Related Programming
Title
M.B. Number Memory Block Name
Timer
Class
1-1-63 Hold Recall Time Selection (Exclusive)
1-2-23 System Call Park Recall Time Selection
4-71 Station to Timer Class of Service (R3000 or higher)
1~4
0 3 : H L D R C L 1 = 0 6 0 s
T I M E D I S P L A Y
Setting
Data
� Notes �
Default Values
Class 1~4 = 060s
000s = No Limit
1. Calls put on Exclusive Hold, recall using the data selected in Memory Block 1-1-63 [Hold Recall Time Selection
(Exclusive)].
2. Calls placed on hold on Call Appearance keys, recall using this Memory Block.
3. Calls parked in System Call Park locations recall using Memory Block 1-2-23 (System Call Park Recall Time
Selection).
4. Telephone ports 1 and 2 are in Station to Timer Class of Service, Class 1 by default. All other ports are in Station
to Timer Class of Service, Class 2 by default (R3000 or higher).
5. When a system is upgraded from R2500 or lower, the Hold Recall Time Selection is reset to the default value
during the upgrade process (R3000 or higher).
___________________________________________________________________________________
Programming Manual 2 - 7