Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Electra Elite IPK Document Revision 4
1-1-82 CO Feature Code Service for Code
Restriction
General Description
Use this Memory Block to define a code to send to the CO in front of the dialed
number to allow completion of a CO call made to a Code restricted number set to
allow.
Programming Procedures
1 Go off-line.
Data
No.
Code
Table
01~10
8 2 : 0 1 =
2 Press LK1 + LK1 + HB to access the Memory Block.
3 Use the dial pad to enter the Feature Code for Restriction to Code Table 01.
Use the following to enter data:
�
Jto move the cursor left
Lto move the cursor right
K~Ito enter numeric data
4 Press G to write the data.
Setting
Data
T I M E D I S P L A Y
5 Repeat Steps 3 and 4 for all code Tables. The next Memory Block is displayed.
6 Program the next Memory Block or press E to go back on-line.
Default Values
Not specified
� �
Example: Set Code Table 01 to �67
Notes
System Mode
1
Submode
1
Data No.
82
PC Programming
�+AC
When Tel 100 user dials Access Code 9, Feature Code �67 Telephone Number 12147517000 to access a line
that is code restricted, the code restriction starts at 12147517000. When code restriction is set to allow, the 1214
matches and the call goes through. When Code restriction is deny, the 1214 matches and user receives a
reorder tone and ERROR is displayed on telephones that have a display.
___________________________________________________________________________________
Programming Manual 2 - 103