Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Electra Elite IPK Document Revision 4
Example:
(D) ☎
☎
� Notes �
1. To speak to station user A, station user D dials extension 100.
2. In the example at station A:
System 1 System 2
Electra Elite
Electra System Elite
Elite IPK I
System I
The ICM LED blinks, and a ring tone that is different from the normal ringing tone is heard.
�
The call can be answered by lifting the handset.
�
� Stations B and C users cannot press the line key on the Multiline Terminals to answer the call.
3. In the example, when station user A does not answer in the specified time:
The ringing tone changes to the normal tone and station C starts ringing.
�
Any station (A, B, or C) user can press the flashing line key to answer the call.
�
4. After the timeout, the system uses the Day and Night Ringing Assignment and rings the assigned station.
5. Select ∞ (No Limit) to disable this feature.
Electra Elite
IPK System II ☎
☎
(A) 100
(C) 102
☎ ☎(B) 101
☎
☎(A) 100
(B) 101
(C) 102
Time Elapsed
In this example, systems 1 and 2 are connected. Stations A (extension 100)
and C (extension 102) are assigned to ring on the Tie line using Memory
Blocks 4-01 and 4-02 [CO/PBX Ring Assignment (Day/Night) Mode].
6. Telephone ports 1 and 2 are in Station to Timer Class of Service, Class 1 by default. All other ports are in Station
to Timer Class of Service, Class 2 by default (R3000 or higher).
7. When a system is upgraded from R2500 or lower, the Start Time Selection is reset to the default value during
the upgrade process (R3000 or higher).
___________________________________________________________________________________
Programming Manual 2 - 15