Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Electra Elite IPK Document Revision 4
1-1-33 Speed Dial Number/Name Display
Selection
General Description
Use this Memory Block to specify whether the dialed number or name is displayed first
on the LCD of the originating station when an outgoing call is made using Speed Dial.
Display
Settings
Data
No.
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
DIAL NAME
default.
Programming Procedures
1 Go off-line.
2 Press LK1 + LK1 + CC to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
4 Press G to write the data and display the next Memory Block.
5 Program the next Memory Block or press E to go back on-line.
Related Programming
Title
M.B. Number Memory Block Name
Setting
Title
Data
3 3 : S P D D I A L D I S P
T I M E D I S P L A Y
1-1-18 System Speed Dial Restriction by Tenant
1-1-35 Speed Dial Buffer Allocation
When the name of the dialed party is not programmed in Memory Block 3-00, only the dialed number is displayed
regardless of programming in this Memory Block.
� Notes �
System Mode
1
Submode
1
Data No.
33
PC Programming
�+BE
___________________________________________________________________________________
Programming Manual 2 - 45