Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-15-16 Centralized BLF Send Extension
Number Assignment
General Description
Use this Memory Block to assign the Extension Numbers for sending Centralized BLF
messages.
R1500 or higher is required.
Display
Settings
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
Send Group
1
Send Group
2
Programming Procedures
1 Go off-line.
Data
No.
Title
Send Group
3
Send Group
4
Send Group
5
2 Press LK1 + LK15 + AF to access the Memory Block.
3 Use dial pad keys to enter Table number and Extension No.
Use the following to enter data:
�
Jto move cursor left
Lto move cursor right
Table
No.
(001~120
1 5 : S E N D 0 0 1 =
K~ Ito enter numeric data
Three Digit Extension Number: 100~899
Four Digit Extension Number: 1000~8999
Tables 001~120 can be assigned.
Send Group
6
4 Press corresponding CO/PBX line key to select the Send Group No.
5 Press G to write the data, and display the next Memory Block.
6 Repeat Steps 4 and 5 for each Send Group No.
Extension
Number
T I M E D I S P L A Y
7 Program the next Memory Block or press E to go back on-line.
Send Group
7
Send Group
8
Default Values:
All Tables Not Specified
System Mode
1
Submode
15
Data No.
16
PC Programming
�+AW
___________________________________________________________________________________
2 - 366 Memory Blocks