Electra Elite IPK Programming Manual - Southwestern Telephone ...

Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
3-11 CO External Source Selection
General Description
Use this Memory Block to specify whether the Music On Hold source is from the CO or
an external source (EXT SOURCE).
Display
Settings
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
CO
CO/PBX
No.
(01~64)
EXT
SOURCE
Programming Procedures
1 Go off-line.
Data
No.
2 Press LK3 + G + AAto access the Memory Block.
3 Press LK2 to change Music On Hold to an external source for CO/PBX No.
Use the following to enter data:
�
Jto move the cursor left
Lto move the cursor right
K~Ito enter numeric data or CO/PBX No.
– OR –
D to go to the next assigned CO/PBX No.
4 Press G to write the data and display the next Memory Block.
5 Program the next Memory Block or press E to go back on-line.
Related Programming
Setting
Data
0 1 / 1 1 : C O
T I M E D I S P L A Y
M.B. Number Memory Block Name
3-12 CO Hold Memory Selection
� Notes �
CO/PBX Line Mode
3
selection is the
default.
Submode
—
Data No.
11
PC Programming
�+BCT
When CO is set for EXT SOURCE and left in a trunk group, that CO is skipped in dialing access of the trunk
group.
___________________________________________________________________________________
2 - 434 Memory Blocks