Electra Elite IPK Programming Manual - Southwestern Telephone ...

Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
New Installation
Develop System
Data Sheet
Installation
Test System with Default
Values
System Data
Programming (Note 1)
TEST
2.1 Features of Programming
Component
Replacement
Rewrite System
Data Sheet
Installation
System Data
Programming (Note 2)
Figure 1-1 Programming Flowchart
The following features are provided with Multiline Programming:
Function
Change
System Data
Programming (Note 3)
� The system operates from default after initial power-up. Only the
parameters that change must be programmed.
System programming characters are displayed on the LCD of the
�
Multiline Terminal.
Several types of system programming can be entered at the same time.
�
Data programmed for one telephone (e.g., Tenant Mode, or Telephone
�
Mode) can be copied to another telephone.
___________________________________________________________________________________
1 - 2 Multiline Terminal Programming
TEST
Existing System
Rewrite System
Data Sheet
TEST
Note 1: For new installation, system default values are assigned when power is
turned on. Program the system data to be changed only.
Note 2: For component replacement, program the relevant system data.
Note 3: For function change, program the system data to be revised.