Electra Elite IPK Programming Manual - Southwestern Telephone ...

Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
LK 1 System Mode
Data
No.
LK 2 ICM (Continued)
Memory Block Name Default Value Programming Values
08 Specified Station Access Code
Assignment
9~18 Customized Message 1~10
Assignment
00 = 01
01 ~ 23 Not Set
09 = DND
10 = MEETING
11 = BUSINESS
TRIP
12 = NOT IN
13 = WITH GUEST
14 = OUT OF
OFFICE
15~18 = Not
Specified
Tel. Port Number
Maximum of 13 characters.
19 Intercom Ring Pattern Selection B OFF, ON, A~H
20 Intercom Ring Tone Selection A A~H
21 PS Telephone Block Assignment No CAR Blocks are
Assigned
22 Call Forward – No Answer Time
Selection
23 System Call Park Recall Time
Selection
24 Intercom Feature Access Code
Assignment
25 Internal Paging Alert Tone
Selection
26 Delayed Ringing Time Assignment
(ICM)
8s (R2500 or lower)
12s (R3000 or
higher)
1.0 (R2500 or lower)
060s(R3000 or
higher)
Refer to Appendix B Character Codes,
Section 1 Character Assignment on
page B-1 for a list of characters.
CAR Blocks:
Port 01~C0 - 4 ports per block
4s, 8s, 12s, 18s, 24s, 30s, 60s (R2500
or lower)
01s~99s (R3000 or higher)
In minutes: 0.5, 1.0, 1.5, 2.0, 3.0, 5.0,
8.0, 10.0 (R2500 or lower)
001s~999s (R3000 or higher)
Refer to 1-2-24 Intercom Feature Access Code Assignment on
page 2-126.
YS YS (Tone provided)
NO (No Tone)
10s 00~99 sec.
30 PS Out of Area Time Assignment 08s 00~99 sec.
32 IP Telephone Block Assignment Off (No IP Phone
Blocks Assigned)
33 IP Telephone Block Assignment
Allow/Deny Selection
Off
ON (Green), IP Assigned
On (Red), Block Not available
YS (Allow) YS (Allow), NO (Deny)
___________________________________________________________________________________
1 - 18 Multiline Terminal Programming