Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Electra Elite IPK Document Revision 4
LK 4 Telephone Mode (Continued)
Data
No.
Memory Block Name Default Value Programming Values
93 Internal Zone Paging Selection NO No, A, B, C
94 3-Minute Alarm Selection NO NO, YS
95 DTMF/DP SLT Type Selection MF DP, MF
LK 5 Trunk Group Mode
Data
No.
Memory Block Name Default Value Programming Values
00 Digit Add/Del for Tie Line
Networking Assignment
01 Tie Line Networking Tandem
Connection Assignment
02 8-Digit Matching Table to Trunk
Group Assignment
03 OCC Table to Trunk Group
Assignment
04 LCR Class to Trunk Group
Selection
05 Common Signaling Channel Route
Selection
06 Trunk Group Outgoing Priority
Selection
000
(No Add or Delete)
All Trunk Groups
CO/PBX Line LEDs
On
Enabled
CO/PBX Line LEDs
On
CO/PBX Line LEDs
On
Use All Tables
0 0~4
Delete up to two digits
Add up to two digits
On = Enable
Off = Disable
On = Enable
Off = Disable
On = Enable
Off = Disable
0 (Not Assigned) CCH Range: 1~4
H → L H → L, L → H
___________________________________________________________________________________
Programming Manual 1 - 41