Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-1-57 CO/PBX Prepause Time Selection
General Description
Use this Memory Block to assign a pause time before dialed digits can be sent over a
CO/PBX line after the trunk is seized by a system user.
Settings
Page 1
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
NON
Page 2
1s 2s 3s 4s 5s 6s 7s
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
8s 9s 10s 11s 12s 13s
Programming Procedures
1 Go off-line.
Data
Title
No.
Setting
Data
5 7 : P R E P A U S E 1 s | 1
T I M E D I S P L A Y
Page
No.
2 Press LK1 + LK1 + EG to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
Use the following to change page:
�
C to move to next page
A to move to previous page
4 Press G to write the data and display the next Memory Block.
5 Program the next Memory Block or press E to go back on-line.
System Mode
1
Submode
1
Data No.
57
PC Programming
�+BCM
The shaded
selection is the
default.
___________________________________________________________________________________
2 - 76 Memory Blocks