Electra Elite IPK Programming Manual - Southwestern Telephone ...

Electra Elite IPK Document Revision 4
___________________________________________________________________________________
3-70 CIC Number Assignment
General Description
Use this Memory Block to assign the Circuit Identification Code for each voice channel
used for K-CCIS.
Display
Programming Procedures
1 Go off-line.
No. CO
(01~64)
Data
No.
Title
0 1 / 7 0 : C I C N O 0 0 0
T I M E D I S P L A Y
2 Press LK3 + G + GK to access the Memory Block.
Use the following to enter data:
�
Jto move the cursor left
Lto move the cursor right
Setting
Data
Default Values
CO/PBX Line Mode
3
Submode
—
Data No.
70
PC Programming
�+AW
000 (Not Specified)
CIC Number range: 001~127
K~Ito enter numeric data or CO/PBX No.
– OR –
D to go to the next assigned CO/PBX No.
3 Press G to write the selected data and display next Memory Block or Memory Block 3-00 CO/PBX 02. After the last CO/
PBX is programmed, CO/PBX 01 is displayed again.
___________________________________________________________________________________
Programming Manual 2 - 493