Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Electra Elite IPK Document Revision 4
1-1-69 Tie Line Code Restriction Assignment
General Description
Use this Memory Block to restrict outgoing Tie line dialed digits.
Display
Settings
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
NO YS
default.
Programming Procedures
1 Go off-line.
Data
No.
Related Programming
Title
6 9 : T I E R E S T = Y S
T I M E D I S P L A Y
Setting
Data
2 Press LK1 + LK1 + FI to access the Memory Block.
3 Press the corresponding CO/PBX line key to change data option. Default Values
4 Press G to write the data and display the next Memory Block.
5 Program the next Memory Block or press E to go back on-line.
Refer to Chapter 3 Advanced Applications, Section 1 Code Restriction on page 3-1.
Restriction
System Mode
1
Submode
1
Data No.
69
PC Programming
�+AC
Notes �
�
When Tie lines are assigned code restriction, the Access Code used to dial out of the distant system must be
entered in front of the dialed number in the 8-Digit Matching Tables.
___________________________________________________________________________________
Programming Manual 2 - 89