Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Electra Elite IPK Document Revision 4
1-8-36 COM Port Parity/Stop Bit Setting
Assignment
General Description
Use this Memory Block to specify the Parity and Stop bit for the individual COM ports.
Display
Settings
Data
No.
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
NON/1 NON/2 EVEN/1 ODD/1
default.
Programming Procedures
1 Go off-line.
2 Press LK1 + LK8 + CF to access the Memory Block.
3 Press the corresponding CO/PBX line key to select the parity and stop bit setting. Default Values
4 Press G to write the data, and advance to the next COM port.
5 Repeat steps 3 and 4 for each remaining COM port. The next Memory Block is displayed.
6 Program next Memory Block or press E to go back on-line.
Related Programming
Title
M.B. Number Memory Block Name
1-5-13 Printer Connected Selection
Setting
Data
3 6 : P / S 1 = N O N / 1
T I M E D I S P L A Y
COM 1 = PC Programming
COM 1 = LCR
COM 2 = Station Message Detail Recording (SMDR)
COM 3 = Automatic Call Distribution [Not used by Electra Elite IPK Basic Port Package (48).]
� Notes �
COM 1 = Non/1
COM 2 = Non/1
COM 3 = Non/1
System Mode
1
Submode
8
Data No.
36
PC Programming
�+CSS
___________________________________________________________________________________
Programming Manual 2 - 245