Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
Related Programming
M.B. Number Memory Block Name
7-1 Card Interface Slot Selection
1-16-00 Auto Negotiation Yes/No Selection
1-16-01 Port Speed Selection – 10/100 Base T
1-16-02 Port Duplex Mode Selection
1-16-03 MDI/MDIX Mode Selection
1-16-04 VLAN Mode Selection
1-16-05 Default VLAN ID Tag Insertion Assignment
1-16-06 Port Based Priority Selection
1-16-07 High Priority RX Tag Threshold
1-16-08 High Priority TX Tag Assignment
1-16-10 Port Mirroring Selection
1-16-11 Mirroring Source Port Assignment
1-16-12 Mirroring Target Port Assignment
1-16-13 VLAN Group to VLAN ID Assignment
1-16-14 Port VLAN Group Membership
1-16-15 VLAN Tag Insertion Selection
1-16-16 Flow Control for Full Duplex Selection
1-16-17 Back Pressure for Half Duplex Selection
1. Only one HUB(8)-U( ) ETU can be assigned and installed for each cabinet.
� Notes �
2. When the HUB(8)-U( ) ETU transmits a packet in VLAN mode, the priority field can be assigned for each frame
transmitted by the assignment of this Memory Block.
This Memory Block assigns the priority value for Low Priority frames. Memory Block 1-16-08 (High Priority TX
Tag Assignment) assigns the priority for High Priority frames.
___________________________________________________________________________________
2 - 398 Memory Blocks