Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-5-13 Printer Connected Selection
General Description
Use this Memory Block to program printer connection. When the printer is not
connected to the system, an alarm sounds at stations connected to Ports 01 and 02.
Display
Settings
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
NO
SMDR Off
Data
No.
PC
CSV Format
Programming Procedures
1 Go off-line.
YES
SMDR On
2 Press LK1 + LK5 + AC to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
4 Press G to write the data. The next Memory Block is displayed.
5 Program the next Memory Block or press E to go back on-line.
Related Programming
Title
1 3 : P R I N T E R N O
T I M E D I S P L A Y
M.B. Number Memory Block Name
1-5-02 SMDR Print Format
1-5-14 Printer Line Feed Control Selection
1-5-25 SMDR Valid Call Time Assignment
Setting
Data
1-8-35 COM Port Baud Rate Setting Assignment
1-8-36 COM Port Parity/Stop Bit Setting Assignment
� Notes �
selection is the
default.
System Mode
1
Submode
5
Data No.
13
PC Programming
�+AS
When PC is assigned, the SMDR output data can be saved in a Comma-Separated Values (CSV) format file on a
PC. The file can then be opened using PC software (i.e., MS Excel) to analyze, filter, and/or sort the data.
___________________________________________________________________________________
2 - 178 Memory Blocks