Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-7-08 External Speaker Chime Selection
General Description
Use this Memory Block to specify whether a normal paging alert tone (4 tones) sounds
before the speech path is established, a chime sounds at the start of the call, or a
chime sounds at the start and end of the call.
Display
Settings
Data
No.
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
PRT C-S C-B
default.
PRT = Normal Paging Tone Before the Page
C-S = Chime - Start Only (4 Tone Chime)
C-B = Chime - Both Start and End (4 Tone Chime)
Programming Procedures
1 Go off-line.
2 Press LK1 + LK7+ KH to access the Memory Block.
3 Press the corresponding CO/PBX line key to change the data option.
4 Press G to write the data. The next Memory Block is displayed.
5 Program the next Memory Block or press E to go back on-line.
Related Programming
Title
M.B. Number Memory Block Name
Setting
Data
0 8 : S P K O N P R T
T I M E D I S P L A Y
1-7-03 External Page Alert Tone Selection
1-7-09 External Speaker Chime Start Time Selection
Memory Block 1-7-03 (External Paging Alert Zone Selection) must be enabled for this Memory Block to function.
� Notes �
System Mode
1
Submode
7
Data No.
08
PC Programming
�+BP
___________________________________________________________________________________
2 - 204 Memory Blocks