Electra Elite IPK Programming Manual - Southwestern Telephone ...

Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
Time
CO/PBX Incoming
Ringing Alarm Time
Selection
Tie Line Delay
Ringing Time
Selection
Station Transfer/
Camp-On Recall
Time Selection
Trunk Queuing
Timeout Selection
CO/PBX Prepause
Time Selection
Hold Recall Time
Selection
(Exclusive)
First Delay
Announcement
Start Time
Selection
First to Second
Delay
Announcement
Interval Time
Selection
Second Delay
Announcement
Repeat Interval
Time Selection
Memory
Block
Table A-1 Function Time Chart (Continued)
Definition
1-1-06* The time after an incoming
CO/PBX call is detected before
the ringing tone changes to a
different ringing tone level
when the call is not answered.
1-1-07* The time between when a
telephone rings (accessed by a
ringing call in the Tie/DID line)
and calls can start ringing at
other assigned stations when it
is not answered.
1-1-12* The time before a ring
transferred call recalls to the
station that transferred the call.
1-1-37* The time a station with Trunk
Queue set rings before the
queue is automatically
canceled.
1-1-57 The time before dialed digits
are sent over a CO/PBX line
after the line is seized.
1-1-63* The time (minutes) for
Exclusive Hold Recall. No limit
disables this feature.
1-1-71 The time (seconds) between
receiving an incoming CO call
and sending the First Delay
Announcement to the caller.
1-1-73 The time (seconds) between
the end of the First Delay
Announcement and the
beginning of the second
Second Delay Announcement.
1-1-75 The time (seconds) to repeat
the Second Delay
Announcement.
___________________________________________________________________________________
A - 2 Function Time Chart
10s
000s
(No Limit)
10s
000s
(No Limit)
25s
000s
(No Limit)
10s
00s
(No Limit)
∞
000s
∞
000s
45s
060s
10s
10s
∞
255s
∞
255s
∞
999s
60s
99s
NON 1s 13s
0.5
000s
(No Limit)
Value
Minimum Default Maximum
1.0
060s
∞
999s
00 20 60
00 20 ∞
0 20 ∞