Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Electra Elite IPK Document Revision 4
1-10-04 Call by Call Network ID Assignment
General Description
Use this Memory Block to send the Network Identification (NID) for each Route
Advance Block (RAB). This setting data is sent in the NID field of the CIC-IE (Carrier
Identification Code-Information Element) when making outgoing calls.
Display
Programming Procedures
1 Go off-line.
2 Press LK1 + LK10 + JD to access the Memory Block. Default Values
3 Enter three or four digit data using the dial pad.
Use the following to enter data:
�
JandLto move the cursor
K~Ito enter data
D to select next RAB No.
H to clear Setting Data
4 Press G to write the data. The next Memory Block is displayed.
5 Program the next Memory Block or press E to go back on-line.
Related Programming
Data
RAB
01~32 Title
No.
0 1 / 0 4 : N I D =
T I M E D I S P L A Y
M.B. Number Memory Block Name
3-03 Trunk-to-Trunk Group Assignment
1-1-30 Route Advance Block Assignment
1-1-46, 47, 48 Access Code (1-, 2-, or 3-Digit) Assignment
1-10-00 Call by Call Type of Network ID Assignment
1-10-01 Call by Call ID Plan Assignment
Setting
Data
1-10-02 Call by Call Type of Number Assignment
1-10-03 Call by Call Numbering Plan ID Assignment
1-10-05 Call by Call Facility Coding Value Assignment (Service)
1-10-06 Call by Call Facility Coding Value Assignment (Feature)
System Mode
1
Submode
10
Data No.
04
PC Programming
�+AY
All RABs Unspecified
___________________________________________________________________________________
Programming Manual 2 - 271