Electra Elite IPK Programming Manual - Southwestern Telephone ...

Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
Line
Key
LK 8 Special Mode
2.3 Before Programming
The technician should check the ROM version and the port numbers before
programming the system.
2.3.1 Check Points
Confirm the ROM Version
�
The available features depend on the ROM version. Refer to
Memory Block 8-1 (ROM Version Confirmation), or from any
idle Display Terminal, press A andC.
Confirm the Port Number
�
Port numbers are used for system programming. Refer to
Memory Block 7-1 (Card Interface Slot Assignment).
2.3.2 Preliminary Points
Table 1-1 Programming Modes (Continued)
Mode Name
LK 1 ROM Version Confirmation
LK 2 System Speed Dial Memory Clear
LK 3 Station Speed Dial Memory Clear
LK 8 Second Initialization
To confirm station numbers press A andD. The display
indicates the station number and the port number.
Station
Number
Select System Programming
�
Refer to Section 2 Programming the System on page 1-1.
___________________________________________________________________________________
1 - 4 Multiline Terminal Programming
Line
Key
Port
Number
# # # = T E L X X
T I M E D I S P L A Y
Submode Name