Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-8-18 Site Name Assignment
General Description
Use this Memory Block to specify a site name for PC Programming software to use to
program the system.
Display
Data
No.
Programming Procedures
1 Go off-line.
Title
1 8 : S I T E =
Setting
Data
T I M E D I S P L A Y
2 Press LK1 + LK8 + AH to access the Memory Block.
3 Use the Character Code Table in Appendix B Character Codes, Section 1 Character Assignment on page B-1 and enter up to
eight characters for Setting Data.
Use the following to enter data:
�
H to clear data at cursor
4 Press G to write the data. The next Memory Block is displayed.
5 Program next Memory Block or press E to go back on-line.
1. When programmed, this assignment creates a directory in the PC after download is performed.
� Notes �
System Mode
1
Submode
8
Data No.
18
PC Programming
�+CSN
2. System Software allows the name to be entered using the dial pad instead of the ASCII Character Code Tables.
Follow the procedure in Appendix B Character Codes, Section 1 Character Assignment on page B-1.
___________________________________________________________________________________
2 - 232 Memory Blocks