Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Electra Elite IPK Document Revision 4
1-16-05 Default VLAN ID Tag Insertion
Assignment
General Description
Use this Memory Block to insert VLAN ID tagging to data frames from network devices
that cannot insert VLAN tags. When data without a VLAN tag is transmitted by the
device on the port, a tag is inserted with the VLAN ID assigned by this Memory Block.
R1500 or higher is required.
Display
Programming Procedures
1 Go off-line.
Data
No.
HUB
1~3
PORT
1~8
Title
2 Press LK1 + LK16 + JJKE to access the Memory Block.
3 Use dial pad keys to enter Setting data.
Use the following to enter data:
�
Use Jto move cursor left
Use Lto move cursor right
Use K~ Ito enter numeric data
VLAN ID range is 0001~4095 (0x001~ 0xfff Hex).
�
4 Press G to write the data.
5 Repeat steps 3 and 4 for each port.
6 Press E to go back on-line.
Setting
Data
0 5 : 1 - 1 I D = 0 0 0 1
T I M E D I S P L A Y
Default Values:
All ports = 0001
System Mode
1
Submode
16
Data No.
05
PC Programming
�+AB
___________________________________________________________________________________
Programming Manual 2 - 389