Electra Elite IPK Programming Manual - Southwestern Telephone ...

Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
4-52 CO/PBX Answer Key Operation
Without Ringing Assignment (Day
Mode)
General Description
Use this Memory Block to specify whether or not day assignment Answer key
operation uses ringing. When NO is selected, press the Answer key while an incoming
CO line key is flashing to answer the line key call. When YS is selected, the telephone
must be ringing for the Answer Key to answer an incoming CO/PBX call.
Display
Settings
Tel
Port
No.
(01~C0)
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8 The shaded
selection is the
NO YS
default.
Programming Procedures
1 Go off-line.
Data
Title
No.
0 1 / 5 2 : R I N G D Y S
T I M E D I S P L A Y
2 Press LK4 +EB to access the Memory Block.
3 Press LK1 to disable ringing for answer key operation for Tel Port No.
Use the following to enter data:
�
Jto move the cursor left
Lto move the cursor right
Setting
Data
K~Ito enter numeric data or Tel Port No.
– OR –
D to go to next assigned Tel Port No.
B + Ato enter A for Port Numbers 100~109
B + Bto enter B for Port Numbers 110~119
B + Cto enter C for Port Number 120
4 Press G to write the data and display the next Memory Block.
5 Program the next Memory Block or press E to go back on-line.
Telephone Mode
4
Submode
—
Data No.
52
PC Programming
�+BTT
___________________________________________________________________________________
2 - 566 Memory Blocks