Electra Elite IPK Programming Manual - Southwestern Telephone ...

Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
4-71 Station to Timer Class of Service
General Description
Use this Memory Block to specify the Timer Class of Service per station.
R3000 or higher is required.
Port Tel
No.
(01~CO)
Programming Procedures
1 Go off-line.
Data
Title
No.
0 1 / 7 1 : T M R C L S 1
T I M E D I S P L A Y
2 Press LK4 + GA to access the Memory Block.
3 Use the dial pad to change Station to Timer Class of Service.
Use the following to enter data:
�
Jto move the cursor left
Lto move the cursor right
Setting
Data
1~4
K~Ito enter Restriction Class or Tel Port No.
– OR –
D to go to next assigned Tel Port No.
B + Ato enter A for Port Numbers 100~109
B + Bto enter B for Port Numbers 110~119
B + Cto enter C for Port Number 120
4 Press G to write the data and display the next Timer Class of Service.
5 Program the next Timer Class of Service or press E to go back on-line.
Default Value
Tel Ports 1 & 2 = Class 1
All other ports = Class 2
CO/PBX Line Mode
4
Submode
—
Data No.
71
PC Programming
�+AC
___________________________________________________________________________________
2 - 596 Memory Blocks