Electra Elite IPK Programming Manual - Southwestern Telephone ...

___________________________________________________________________________________
Document Revision 4 Electra Elite IPK
1-14-01 ARS Dialing Assignment
General Description
Use this Memory Block to assign a dialing plan to one of four ARS Tables. Each table
contains 128 maximum dialing assignments for the selected dialing plan.
Display
Programming Procedures
1 Go off-line.
Data
No.
Table
No.
1~4
0 1 : 1 / 0 1 =
2 Press LK1 + LK14 + KA to access the Memory Block.
3 Use dial pad keys to select Table number.
Use the following to enter data:
�
Jto move cursor left
Lto move cursor right
H to clear setting data
Table No. 1~4 (Table Number is Class number)
�
Dial No. 01~C8
�
Setting Data: �
0~9, J, �, #, X, P, N (8 Digit Maximum)
Operation Data Includes:
�
Operation
Data
Dial
No.
Setting
Data
T I M E D I S P L A Y
Dial Operation
X K~I, L J, Redial + 7
P K and A Redial + 8
N B~ I Redial + 9
� J Redial + �
# L Redial + #
4 Press G to write the data. The next Dial No. is displayed.
Default Values
5 Repeat Steps 3 and 5 for each Dial No. (01~C8) for Table 1. After Dial No. C8 is programmed, the next Table No. is displayed.
6 Repeat Programming cycle for each dial No. (01~C8) for Tables 2~4. The next Memory Block is displayed.
7 Program the next Memory Block or press E to go back on-line.
___________________________________________________________________________________
2 - 318 Memory Blocks
None
System Mode
1
Submode
14
Data No.
01
PC Programming
�+AB