Electra Elite IPK Programming Manual - Southwestern Telephone ...

Document Revision 4 Electra Elite IPK
___________________________________________________________________________________
4-55 CO/PBX Telephone Ringing Pattern
Selection
General Description
Use this Memory Block to specify the ringing pattern assigned to each telephone.
Display
Settings
Page 1
LK 1 LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
—
(None)
Page 2
Port Tel
No.
(01~CO)
Ringing
Pattern A
Ringing
Pattern B
Ringing
Pattern C
Ringing
Pattern D
Ringing
Pattern E
Ringing
Pattern F
Ringing
Pattern G
LK 1
Ringing
Pattern H
LK 2 LK 3 LK 4 LK 5 LK 6 LK 7 LK 8
Programming Procedures
1 Go off-line.
Data
Title
No.
0 1 / 5 5 : C O R N G – | 1
T I M E D I S P L A Y
2 Press LK4 + EE to access the Memory Block.
3 Press the corresponding CO/PBX line key to select the ringing pattern for Tel Port No.
Use the following to enter data:
�
Jto move the cursor left
Lto move the cursor right
Setting
Page
Data
K~Ito enter numeric data or Tel Port No.
– OR –
D to go to next assigned Tel Port No.
C to go to the next page
A to go to the previous page
B + Ato enter A for Port Numbers 100~109
B + Bto enter B for Port Numbers 110~119
B + Cto enter C for Port Number 120
4 Press G to write the data and display the next Memory Block.
5 Program the next Memory Block or press E to go back on-line.
CO/PBX Line Mode
4
The shaded
selection is the
default.
Submode
—
Data No.
55
PC Programming
�+BTT
___________________________________________________________________________________
2 - 572 Memory Blocks