07.04.2013 Views

m*- w - Clpdigital.org

m*- w - Clpdigital.org

m*- w - Clpdigital.org

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

1.<br />

2.<br />

3.<br />

4<br />

5.<br />

6<br />

7<br />

R.<br />

9.<br />

11),<br />

11.<br />

12,<br />

13<br />

14.<br />

END VIEW OF<br />

REPRODUCER.<br />

Main wheel.<br />

Ratchet and spring.<br />

Main arbor or staff.<br />

Center wheel.<br />

Third pinion.<br />

Third wheel.<br />

Third wheel arbor or staff.<br />

Center pinion.<br />

Screw.<br />

Wooden block.<br />

Record plate or bottom of a<br />

pie tin.<br />

Wooden block supporting<br />

record plate.<br />

Center arbor or staff.<br />

Brass frame or plate of clock<br />

movement.<br />

15—18. Small wheels forming ends<br />

of governor.<br />

HOW TO MAKE A PHONOGRAPH 597<br />

KEY TO NUMBERED PARTS<br />

16<br />

17-<br />

18<br />

19<br />

19<br />

20<br />

21<br />

22<br />

23<br />

24<br />

25<br />

26<br />

Burrs on 19 to Icontrol governor.<br />

-17. Small springswith weights<br />

to form sides of governor.<br />

See 15.<br />

Fourth wheel arbor or staff.<br />

Fourth pinion.<br />

Fourth wheel.<br />

Wooden block acting as brake<br />

on fourth wheel.<br />

Tightly connected pivot on<br />

arm supporting 23.<br />

Brake lever.<br />

Winding key.<br />

Nut and bolt holding reproducer<br />

or sound box together<br />

(three of these).<br />

End of scarf pin.<br />

To the third elbow I fastened the tin<br />

megaphone.<br />

Then I attached this rig to an upright<br />

which I nailed to the soap box, in such<br />

a way that it would be free to swing,<br />

and balanced a little to the left, so its<br />

tendencv would be to swing that way.<br />

The adjustment of this somewhat delicate<br />

balance was the hardest part of the<br />

entire job.<br />

My phonograph was now complete<br />

and I set a record on it. To my surprise,<br />

SIDE VIEW OP<br />

REPRODUCER.<br />

27.<br />

28.<br />

29.<br />

30.<br />

31.<br />

32.<br />

33.<br />

34.<br />

35.<br />

36.<br />

37.<br />

9<br />

•10<br />

II<br />

-12<br />

-13<br />

-14<br />

-15<br />

-18<br />

-19<br />

-20<br />

-21<br />

-22<br />

-23<br />

•36<br />

Scarf pin.<br />

Solder patch holding scarf pin<br />

to telephone receiver diaphragm.<br />

Diaphragm.<br />

One of two iroD washers.<br />

Piece of wire supporting scarf<br />

pin.<br />

Loop in scarf pin, around wire<br />

support.<br />

Small screw to hold needle.<br />

Needle.<br />

Shell of electric light socket.<br />

End of iron pipe elbow, fitted<br />

into 35.<br />

Wooden block to hold scarf<br />

pip and needle.<br />

it really played! Not exquisitely, perhaps—let<br />

us rather say with surprising<br />

ability and persistence.<br />

Had I been obliged to purchase the<br />

material out of which this home-made<br />

and homely machine is made, it would<br />

have cost me from one dollar to two<br />

dollars, the greatest expense being for<br />

the clock works. I have an idea, however,<br />

that the resources of nearly any<br />

attic or basement storeroom contain all<br />

the requisite materials.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!