Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
Creating flow sources
Use the Flow Source dialog to manually create SNMP sources when detailed flow data is not
needed or is unavailable for a particular source.
You can manually create a flow source and configure it to use SNMP to collect the following
types of data:
Total counts for incoming and outgoing interface data.
CBQoS information.
Total counts for NBAR data.
To create an SNMP source:
1 Navigate to the Flow Source creation dialog (Flow Monitor > Sources).
2 Click Create Source. The Flow Source dialog appears.
3 Identify and enable the flow source.
a) In the Source IP Address box, type the IP address of the device you want to make a
Flow Monitor source.
b) In the Display Name box, type the name you want to use to identify the flow source.
1004