Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
There are different options to Collect data for for each default performance monitor. The
following performance monitors (CPU, Disk, Memory, and Ping) offer the following options:
(No Change). Select this option to retain the current settings for a performance
monitor.
(All). Select this option to change all instances of the monitor on the selected devices.
(Default) (available for Ping monitors only). Select this option to set the performance
monitor to collect data from the interface designated as the default interface in the
device properties.
(None). Select this option to remove a performance monitor from the selected
devices.
The following monitors have additional options available:
Interface
(No Change). Select this option to retain the current settings for a performance
monitor.
(All). Select this option to change all instances of the monitor on the selected devices.
(Active). Select this option to set the performance monitor to collect data from
interfaces that are up at the exact time of the poll.
(Custom Active). Select this option to set the performance monitor to collect data
from the interfaces that are configured as custom active interfaces in each
performance monitor.
High speed interfaces (Gigabit or faster). Select this option to collect data from
all custom active high speed interfaces. This is the default selection.
Name contains. Select this option to collect data from all custom active interfaces
that contain the variable you enter. For example, if your network naming scheme
includes a subgroup named "customer," you would enter customer in the field to
gather data from all interfaces for the subgroup that contain customer in the
interface name.
Type is. Select this option and choose the interface type to collect data from all
custom active interfaces of that type.
(None). Select this option to remove a performance monitor from the selected device
interface.
Errors and discards data collection for enabled interfaces. Select this option to
collect device interface data on devices that have the Interface Utilization option
selected:
ifInErrors. Lists the number of inbound packets with errors, on the selected
interface, that prevent the packets from being delivered to a higher-layer
protocol. The associated OID is 1.3.6.1.2.1.2.2.1.14.
ifOutErrors. Lists the number of outbound packets with errors, on the selected
interface, that prevent the packets from being delivered to a higher-layer
protocol. The associated OID is 1.3.6.1.2.1.2.2.1.20.
821