Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
Configuring a Flow Monitor Interface Traffic threshold
To configure a Flow Monitor interface traffic threshold:
1 Click the Alert Center tab.
2 Click Threshold Library. The Alert Center Threshold Library dialog appears.
3 Click New. The Select Threshold Type dialog appears.
4 Select Flow Monitor Interface Traffic, then click OK. The New Flow Monitor Interface
Traffic Threshold dialog appears.
5 Specify or select the appropriate information in the dialog fields:
Name. Specify a name for the threshold. This name helps you identify the threshold in
the Threshold library and displays as the report title on the Alert Center Home page.
Threshold. Select and enter the desired threshold criteria variables and values. The
default threshold is configured to alert when incoming or outgoing interface traffic
exceeds 90% for more than 60 minutes.
Traffic to monitor. Select the Flow Monitor sources from which to monitor traffic; all
interfaces on a Flow source are monitored. By default, the threshold is set to monitor
traffic from all Flow sources.
786