Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
To change the interface for which data is reported:
1 From the toolbar at the top of the screen, click the Interface list. A list of all of the
available interfaces appears.
2 Select the interface for which you want to view the current report. The report refreshes
with data from the selected interface.
Filtering data in a view
You can filter the data in the Interface Details report in several ways.
Date and time
Traffic direction
Keywords
After you apply a filter, the report data refreshes to display data relevant to the applied filter.
Filtering by date and time
By default, the Interface Details report views shows data for the previous fifteen minutes. You
can modify this time range by selecting the time frame from the Date range field.
To change the time frame for which the Interface Details report displays data:
1 At the top of the report, select Date range. A list of common time periods appears.
2 Select one of the available time periods.
3 If you select Custom, the Start time and End time fields appear.
Note: Flow Monitor only displays data from one database at a time, and by default, displays
the most current data. If you select a time period that includes data stored in both the Flow
Monitor database and the Flow Archive database, a note displays below the date range
informing you that not all data is shown for the specified date range. For example, if you
select a date that includes 39 days of archived data, and one hour of current data, one hour
of current data is displayed in the report. You must modify the report's date to view the
archived data.
a) In Start time, select the date and time that corresponds with the beginning of the
time period.
b) In End time, select the date and time that corresponds with the end of the time
period.
Note: When you set a start and end time for report data, you will most likely see a larger data
total than expected. This is because the data displayed is a summation of the start time, or
data greater than or equal to the selected start time, and the end time, or data less than or
equal to the selected end time.
4 Click Go to apply the filter to the report. The report refreshes showing only data from
the selected time period.
1044