Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
Configuring an interface utilization threshold
To configure an interface utilization threshold:
1 Click the Alert Center tab.
2 Click Threshold Library. The Alert Center Threshold Library dialog appears.
3 Click New. The Select Threshold Type dialog appears.
4 Select Performance Interface, then click OK. The New Interface Utilization Threshold
dialog appears.
5 Specify or select the appropriate information in the dialog fields:
Name. Specify a name for the threshold. This name helps you identify the threshold in
the Threshold library and displays as the report title on the Alert Center Home page.
Threshold. Select and enter the threshold criteria variables and values. The default
threshold is configured to alert when inbound or outbound utilization exceeds 90%
for more than 60 minutes.
Devices to Monitor. Click Select to choose the devices to which the threshold
applies. By default, the threshold monitors all devices where the applicable monitor is
enabled.
760