Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
A subnet. To create a Dynamic Group consisting of devices within a certain subnet,
you can create a rule that searches for devices on a specific IP address' subnet. You
will be required to know an IP address and a subnet mask. You can either the subnet
mask or the prefix length of that subnet in the Mask field.
Using the A subnet option requires that you have some knowledge of CIDR notation.
The "IP address is within" rules do not support IPv6 addresses. A full rule should read
something like, "Match the following rule where: IP address starts with 192.6."
Click OK to add the rule to the Dynamic Group Builder dialog.
MIB Walker Advanced Parameters
Use this dialog to configure the advanced parameters for the SNMP MIB Walker network tool.
Enter the appropriate information in the following fields:
Timeout. Enter a value for the timeout (in seconds).
Retries. Enter a value for the number of retries on the search.
Output type. Select the format for which you want the MIB object information
displayed. There are three display formats:
317