Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
Split Second Graphs - Real-Time Interface Utilization for devices
Under the main report graph is a Split Second Graph that displays real-time interface traffic
data.
Note: Split Second Graphs are not available in WhatsUp Gold Standard Edition.
Note: Split Second Graphs are not available in VMware host reports.
Note: When viewing information for devices running Microsoft Windows, information
gathered via WMI is displayed in real time. Information gathered by SNMP, however, may
reflect a delay of one minute or more. This delay is caused by a limitation in how often
Microsoft Windows updates SNMP values.
Below the Split Second Graph, the Summary report displays the average interface utilization
collected during the time period:
Min. The minimum bits per second rate recorded for the interface.
Max. The maximum bits per second rate recorded for the interface.
Avg. The average bits per second rate recorded for the interface during the time
period.
Min Utilization %. The minimum interface utilization percentage recorded.
Max Utilization %. The maximum interface utilization percentage recorded.
Avg Utilization %. The average interface utilization percentage across all sample
data for this time period.
Note: Values displayed in the graph are the average values for the selected time period.
Values displayed in the summary are the minimum, maximum, and average values for the
selected time period. If raw polling data has been averaged into hourly or daily summarized
data, the values for min and average, or maximum and average can be different. In some
cases, they may be very different if there was a period of time when polled values were much
higher or lower than normal.
You can verify your report rollup settings on the WhatsUp Gold console via Program
Options > Report Data (on page 815).
Monitor report body for groups
Below the date/time picker is a table showing interface utilization across the current group
for the selected time period.
Device. The name and IP address of the device.
Description. The label for the interface being shown.
Transmit %. The percentage of available bandwidth used by this interface in
transmitting data.
646