Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
Monitor report body for group reports
The group report displays a list of all devices in the group and the custom monitor applied to
each device. To view the custom monitor data for each device, click the link to the right of the
device name in the Monitors column.
Monitor report body for device reports
Below the date/time picker, Monitor, and Chart size boxes is a graph showing the
chosen monitor for the selected time period. Each point on the graph corresponds
with an entry in the graph data table below.
Split Second Graph - Real Time
Under the main report graph is a Split Second Graph that displays real-time data for the WMI
or SNMP custom performance monitor.
Note: Split Second Graphs are not available in WhatsUp Gold Standard Edition.
Note: Split Second Graphs are not available in VMware host reports.
Note: When viewing information for devices running Microsoft Windows, information
gathered via WMI is displayed in real time. Information gathered by SNMP, however, may
reflect a delay of one minute or more. This delay is caused by a limitation in how often
Microsoft Windows updates SNMP values.
Note: Split Second Graphs are not available with Active Script performance monitors.
At the bottom of the graph, the report displays the average monitor percentages collected
during the time period:
Minimum. The minimum monitor percentage experienced.
Maximum. The maximum percentage experienced.
Average. The average monitor percentage across all sample data for this period.
Note: Values displayed in the graph are the average values for the selected time period.
Values displayed in the summary are the minimum, maximum, and average values for the
selected time period. If raw polling data has been averaged into hourly or daily summarized
data, the values for min and average, or maximum and average can be different. In some
cases, they may be very different if there was a period of time when polled values were much
higher or lower than normal.
You can verify your report rollup settings on the WhatsUp Gold console via Program Options
> Report Data (on page 815).
640