Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
Configuring a top sender/receiver threshold
To configure a Flow Monitor top sender/receiver threshold:
1 Click the Alert Center tab.
2 Click Threshold Library. The Alert Center Threshold Library dialog appears.
3 Click New. The Select Threshold Type dialog appears.
4 Select Flow Monitor Top Sender/Receiver, then click OK. The New Flow Monitor Top
Sender/Receiver Threshold dialog appears.
5 Specify or select the appropriate information in the dialog fields:
Name. Specify a name for the threshold. This name helps you identify the threshold in
the Threshold library and displays as the report title on the Alert Center Home page.
Threshold. Select and enter the desired threshold criteria variable and values. The
default threshold is configured to alert when a host has sent or received more than
500 MB in the past 15 minutes.
Traffic to monitor. Select the Flow Monitor source or interface from which to monitor
traffic.
When you select a source, traffic for all interfaces on the source is monitored. When
you select an interface, only traffic for the selected interface is monitored.
By default, the threshold is set to monitor traffic from all Flow Monitor sources.
788