Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
Bulk Field Change - Active Monitor Properties
Use this dialog to make configuration changes to active monitors on multiple devices.
Important: If a selected device does not currently have the active monitor associated to it,
no modifications will be made to that device. Only devices that have the active monitor will
be changed.
Active monitors found in selected devices. Select an active monitor from this pulldown
menu. This list is populated with all active monitors found on the selected
devices.
Enable polling. Select On, Off, or No Change. On turns polling on for the selected
active monitor, Off suspends polling on the monitor, and No Change makes no
modification to the monitor.
Use independent poll frequency. If you want to have WhatsUp Gold poll the active
monitor at a non-default interval, select Yes from the list-box. Select No to return the
interval to the application-wide default.
Set poll frequency to. Select a time (in seconds) you want WhatsUp Gold to wait
between polls on the selected active monitor.
Action policy. Select an action policy to add to the selected active monitor for each
selected device. The list is populated with all policies in the Action Library. Select
None to remove existing action policies from the active monitor on the selected
devices. Click the browse (...) button to access the library to view or modify the action
policies.
Argument. Enter an argument for the active monitor, or select None to remove
arguments from the active monitor on the selected devices.
Operation. Select an operation from the drop down menus.
Custom Value. Enter a custom value for the active monitor.
Comment. Enter a comment for the active monitor, or select None to remove
comments from the active monitor on the selected devices.
Bulk Field Change - Attribute
How to get here
Select a task from the Operation pull-down menu: Add/Update or Remove.
In the Attribute name box, enter a name for the attribute you are adding to the
selected devices.
In the Attribute value box, enter the text for the attribute itself.
328