Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
You can easily determine which dashboard report contains the time graph by looking for the
filter enclosed in parenthesis to the right of the dashboard report title name.
Tip: You can remove the applied filter by clicking the red X under the time graph.
To filter by keywords:
1 At the top of the report, select Add Filter. Filter fields appear below the button.
2 Select the type of filter you want to apply.
Note: When you are using a type of filter that matches a device using an IP address, you can
use CIDR notation to identify a subnet of hosts from which the reports will display data. For
example, When you select a Sender filter type, you can specify a subnet using
192.168.11.0/24 to display information from all of the hosts in the subnet.
Sender. Show traffic sent by the specified device. You can match a device using its
host name or its IP address.
Receiver. Show traffic received by the specified device. You can match a device using
its host name or its IP address.
Protocol. Show traffic that used the specified protocol (such as UDP, TCP, or ICMP).
Service. Show traffic that used the specified type of service.
Application. Show traffic that used the specified application. The keyword must
match the application name as configured in the Flow ports dialog.
Tip: You can enter a port number instead of an application name to show all traffic
transmitting over a certain port.
Sender Domain. Show traffic sent by hosts on the specified domain.
Receiver Domain. Show traffic received by hosts on the specified domain.
Sender Country. Show traffic sent by devices whose IP addresses are registered to
the specified country.
Receiver Country. Show traffic received by devices whose IP addresses are registered
to the specified country.
Sender Group. Show traffic sent by the specified group.
Receiver Group. Show traffic received by the specified group.
Sender TLD. Show traffic sent by domains that have the specified top level domain
(such as .com, .net, .us, or .uk).
Receiver TLD. Show traffic received by domains that have the specified top level
domain (such as .com, .net, .us, or .uk).
ICMP Type. Show traffic by ICMP type.
1046