Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
Cisco1812# configure
Cisco1812(config)# interface FastEthernet 9
Cisco1812(config-if)# description CUSTOM NAME
Cisco1812(config-if)# ^Z
Cisco1812#
To add a Performance Monitor for a newly renamed device interface:
1 On the Devices tab, in Device View or Map View, right-click a device, then click
Properties. The Device Properties dialog appears.
2 Click Performance Monitors. The Performance Monitors dialog appears.
3 In the Enable global performance monitors section, click to select the Interface
Utilization option, then click Configure. The Configure Interface Data Collection dialog
appears.
4 In the Collect data for list, select Specific Interfaces. In this example, CUSTOM NAME is
the interface name created for the Cisco router. Click to select CUSTOM NAME, then
click OK.
5 Click OK, then click Close to close the Device Properties dialog.
To add an Active Monitor for a newly renamed device interface:
1 On the Device View (Console) or Details View (Web) or Map View tab, right-click a
device, then click Properties. The Device Properties dialog appears.
906