Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
5 In the Devices to monitor section, click Select. The Threshold Hosts dialog appears.
6 Select the hosts to which the threshold applies.
To apply the threshold to all hosts except the Flow groups, hosts, or IP range that you
specify, click This threshold applies to ALL hosts EXCEPT. After you select this
option, you will choose the hosts to exclude from the threshold.
To apply the threshold to only the Flow groups, hosts, or IP range that you specify,
click This threshold applies to ONLY the following hosts. After you select this
option, you will choose the hosts to include in the threshold.
7 Select the specific hosts to include or exclude from the threshold.
To specify a Flow Group to include or exclude from this threshold, in the upper
section of the dialog, click Add.
Tip: To delete a Flow group, host, or IP range from the list, select it, and then click Remove.
To specify a single host or IP address to include or exclude from this threshold, enter a
Hostname or IP Address, and then click Add.
To specify an IP address range to include or exclude from this threshold, enter a Start
IP Address and an End IP Address, and then click Add.
8 Click OK to save changes.
779