Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
2 Click Active Monitors. The Active Monitors dialog appears.
Important: If a device has active monitors set up prior to renaming the device's interface(s),
then after renaming the device's interface(s), remove the old interface(s) from the Active
Monitor dialog, then click Discover to refresh the device interface list. Use the console
application for the discover process.
If a device has performance monitors set up prior to renaming the device's interface(s), the
device interface names are automatically updated.
3 (Optional) If a device has active monitors set up for a device prior to renaming the
device's interface(s), select the interface(s) that you renamed from the list of interfaces,
then click Remove.
4 (Optional) Click Discover. The interface list refreshes and populates with the new
interface names in the Comment list.
5 Click OK, then click Close to close the Device Properties dialog.
To select a newly renamed device interface for the Interface Utilization report:
1 From the web interface, go to Monitoring > Interface. The Interface log appears.
2 Click the device name/IP address (shown above) to select the device you want to view.
The Select a Device dialog appears.
3 Expand the network tree list to view the SNMPScan devices, then select the device for
which you want to view the Interface Utilization log. The Interface Utilization log
appears.
4 In the Select Interface list, select the newly named device interface. In this example, the
interface is named CUSTOM NAME. View the interface utilization log.
907