Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
Monitor the following output states. Select the output state(s) on which you want
to be alerted. Refer to the APC UPS documentation for more information about the
output states. By default, the following output states are selected for use in the
monitor:
Abnormal Condition Present
AVR Boost Active
AVR Trim Active
Bad Output Voltage
Batteries Discharged
Battery Charger Failure
Battery Communication Lost
Graceful Shutdown Initiated
Graceful Shutdown Issued by Downstream Device
Graceful Shutdown Issued by Upstream Device
High Battery Temperature
In Bypass due to Fan Failure
In Bypass due to Internal Fault
In Bypass due to Supply Failure
Low Battery
Low Battery/On Battery
Manual Bypass
No Batteries Attached
On
On Battery
On Line
Overload
Rebooting
Replace Battery
Runtime Calibration
Self Test In Progress
Serial Communication Established
Sleeping on a Timer
Sleeping until Utility Power Returns
Smart Boost or Smart Trim Fault
324