Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
4 Select SNMP Trap, then click OK. The New SNMP Trap Threshold dialog appears.
5 Specify or select the appropriate information in the dialog fields:
Name. Specify a name for the threshold. This name helps you identify the threshold in
the Threshold library and displays as the report title on the Alert Center Home page.
SNMP Trap type. Select the SNMP trap type from the list that you want to associate
with this threshold.The list is populated with SNMP traps currently configured in the
Passive Monitor Library.
Threshold. Select and enter the desired threshold criteria variables and values. The
default threshold is configured to alert when the number of traps exceeds 500 in the
past 60 minutes.
Devices to Monitor. Click Select to choose the devices to which the threshold
applies. By default, the threshold monitors all devices on which the applicable
monitor is enabled.
771