Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
Monitor report body for device reports
Below the control bar is a graph showing the CPU utilization for the selected time period for
the device displayed in the title bar. Each point on the graph corresponds with an entry in the
graph data table below.
If the currently viewed device contains multiple CPUs, you can select which CPU information
to view by making a selection from the CPU menu in the control bar.
When multiple CPUs are present, the following selections are also available:
The CPU menu lists all available CPUs in the device. You can select any CPU and view
utilization information for that CPU.
All CPUs (average). The average utilization across all CPUs in the device.
All CPUs. A combined graph displaying utilization for all CPUs.
Split Second Graph - Real-Time CPU Utilization for devices
When you view a device, a Split Second Graph displays under the real-time utilization data for
CPUs. When you view a group, hover over the CPU description in the Description column to
view the Split Second Graph for that device.
Note: Split Second Graphs are not available in WhatsUp Gold Standard Edition.
Note: Split Second Graphs are not available in VMware host reports.
Note: When viewing information for devices running Microsoft Windows, information
gathered via WMI is displayed in real time. Information gathered by SNMP, however, may
reflect a delay of one minute or more. This delay is caused by a limitation in how often
Microsoft Windows updates SNMP values.
Below the Split Second Graph, the report displays the average CPU utilization percentages
collected during the time period:
Min Utilization %. The minimum CPU utilization percentage experienced.
Max Utilization %. The maximum CPU utilization percentage experienced.
Avg Utilization %. The average CPU utilization percentage across all sample data for
this time period.
Note: Values displayed in the graph are the average values for the selected time period.
Values displayed in the summary are the minimum, maximum, and average values for the
selected time period. If raw polling data has been averaged into hourly or daily summarized
data, the values for min and average, or maximum and average can be different. In some
cases, they may be very different if there was a period of time when polled values were much
higher or lower than normal.
632