Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
To assign the Norton AntiVirus Monitor, and configure and assign an Email Action:
1 Go to the properties for the device to which you want to assign the monitor.
From either the Device View or Map View, right-click the device. The right-click menu
appears.
Select Properties. The Device Properties dialog appears.
2 Click Active Monitors. The Device Properties - Active Monitors dialog appears.
3 Click Add. The Active Monitor Properties dialog appears.
4 Select the Norton AntiVirus Monitor, then click Next.
5 Set the monitor polling properties, then click Next.
6 Select Apply individual actions, then click Add. The Action Builder appears.
7 Select Create a new action, then click Next.
8 Select the Email Action, then click Next.
9 Under Execute the action on the following state change, select 20 minutes (Down at
least 20 min). This option specifies that WhatsUp Gold will issue a state change after the
monitor has been unable to find rtvscan.exe on the device for 20 minutes.
10 Click Finish. The New Email Action dialog appears.
Note: On the console, ensure that the Mail Destination tab is selected.
11 Enter a Name for the monitor, such as Norton AntiVirus Email Notification.
12 In SMTP Mail Server, enter the IP address or Host (DNS) name of your email server
(SMTP mail host).
13 Enter the Port on which the SMTP Server is installed. The default SMTP port is 25.
14 Optionally, change the Timeout from the default of 5 seconds.
15 In Mail To, enter the email addresses to which you want send the notification. You can
enter two addresses, separated by commas (with no spaces). The address should not
contain brackets, spaces, quotation marks, or parentheses.
16 Select SMTP server requires authentication if your SMTP server uses authentication.
This enables the Username and Password options.
17 Enter a Username and Password to be used with authentication.
18 Select Use an encrypted connection (SSL/TLS) if your SMTP server requires data
encryption over a TLS connection.
212