Ipswitch WhatsUp Gold User Guide - Ipswitch Documentation Server

Ipswitch WhatsUp Gold User Guide
Name. Lists the wireless device name. This is the Cisco IOS device hostname if the
other end of the association is a bridge, access point, or repeater. If it is a wireless
client, this is the configured client name. If this value is not available, then a lookup of
the client's manufacturer is done based on client's MAC address. The associated OID is
1.3.6.1.4.1.9.9.273.1.2.1.1.13.
IP Address. Lists the wireless device IP address. The associated OID is
1.3.6.1.4.1.9.9.273.1.2.1.1.16.
SSID. Lists the Service Set Identifier (SSID), or assigned device name, associated with
the radio interface to broadcast its identity. The associated OID is
1.3.6.1.4.1.9.9.272.1.1.1.6.1.2.
Note: There can be multiple SSIDs for each radio.
MAC Address. Lists the wireless device Media Access Control (MAC) address (physical
address).
Signal Strength. Indicates the connection strength of the wireless device to the
WAP. Each bar indicates 20% signal strength. The associated OID is
1.3.6.1.4.1.9.9.273.1.3.1.1.3.
Signal bar Signal Strength
None
Poor
Fair
Good
Very Good
Excellent
Data Rate. Indicates the current data transmit rate for this client. Rate value is within
the range from 2 to 127, corresponding to data rates in increments of 500 kb/s from 1
Mb/s to 63.5 Mb/s. The associated OID is 1.3.6.1.4.1.9.9.273.1.3.1.1.1.
Connected Since. Lists the time that the wireless device connected to the WAP. The
associated OID is 1.3.6.1.4.1.9.9.273.1.3.1.1.2.
The following wireless client information is available as options for this report:
Bytes Sent. Lists the number of bytes sent by the wireless device to the wireless
access point (WAP). The associated OID is 1.3.6.1.4.1.9.9.273.1.3.1.1.9.
Bytes Received. Lists the number of bytes received by the wireless device from the
wireless access point (WAP). The associated OID is 1.3.6.1.4.1.9.9.273.1.3.1.1.7.
Duplicate Packets. Lists the number of packets sent by the client (received by the
WAP) for which the Sequence Control field in the packet header indicates that the
packet is a duplicate. The associated OID is 1.3.6.1.4.1.9.9.273.1.3.1.1.10.
MSDU Retries. Lists the number of times a MAC Service Data Unit (MSDU) is
successfully transmitted after one or more retransmissions for this client. The
associated OID is 1.3.6.1.4.1.9.9.273.1.3.1.1.11.
578