14.12.2012 Views

Optivity Telephony Manager: System Administration - BT Business

Optivity Telephony Manager: System Administration - BT Business

Optivity Telephony Manager: System Administration - BT Business

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Common services 101<br />

— Ethernet communications cable: 10BaseT cabling requires Category 5<br />

cable with RJ45 connectors<br />

Note: Although normal telephone cable and Category 5 cable are similar in<br />

appearance, telephone cable is not acceptable for network applications.<br />

— For 10Base2 cabling, an RG58 cable with BNC connectors<br />

Note: Although normal television video coaxial cable and RG58 cable are similar in<br />

appearance, video coaxial cable is not acceptable for network applications.<br />

an Ethernet hub for the 10BaseT interface,<br />

3 For PPP communication, you need the following:<br />

Hayes command-compatible modem<br />

Modem cables<br />

For system SDI ports, user type MTC and SCH set in LD 17<br />

4 For serial communication, you need the following:<br />

Hayes command-compatible modem only for remote dial-up<br />

Modem cables<br />

CAUTION — Service Interruption<br />

If you plan to connect the system to a corporate network, you<br />

require an Ethernet gateway or router to separate the system from<br />

the corporate network. If you connect the system without a gateway<br />

or router, you adversely affect the system’s call handling ability.<br />

Direct serial cable connection between the PC and the SDI port on the switch<br />

For system SDI ports, the appropriate user type set in LD 17 for each OTM<br />

application (Table 4)<br />

<strong>Optivity</strong> <strong>Telephony</strong> <strong>Manager</strong> <strong>System</strong> <strong>Administration</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!