14.12.2012 Views

Optivity Telephony Manager: System Administration - BT Business

Optivity Telephony Manager: System Administration - BT Business

Optivity Telephony Manager: System Administration - BT Business

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Station <strong>Administration</strong> 359<br />

Display Name When the Link To Directory check box selected, a single<br />

display name entered here is associated with an employee and<br />

can be synchronized with a corporate LDAP server. If an<br />

employee has more than one DN, and there are different<br />

display names associated with each of the DNs, then either<br />

none or only one of the names is shown as the Display Name<br />

attribute of the Employee Directory.<br />

Department The value, or null, here is taken from the value in the template<br />

you selected for the stations to be added, if any, in the Add<br />

Station dialog box.<br />

h. Click OK.<br />

Adding a phantom station<br />

End of Procedure<br />

Phantom TNs can be assigned only to analog sets.<br />

Using the Phantom Terminal Number (PHTN), you can define and configure TNs with<br />

no associated physical hardware. When used in conjunction with the Call Forward All<br />

Calls (CFW) and Remote Call Forward (RCFW) features, a call to a phantom station is<br />

redirected to an existing telephone. For more information on phantom Terminal<br />

Numbers, see Features and Services (553-3001-306).<br />

Retrieving station data from a system with existing phantom stations preserves the<br />

phantom loops defined for those phantom stations. Phantom loops can only contain<br />

phantom stations.<br />

Procedure 68<br />

Adding a phantom station<br />

1 Use LD 97 to create a phantom loop.<br />

2 Choose View > Hardware from the Station <strong>Administration</strong> window Station view. The<br />

Hardware view appears.<br />

3 Choose Edit > Add. The Hardware Configuration view appears.<br />

Phantom cards have the prefix PHT. If you do not enter values, OTM enters the next<br />

available loop-shelf-card information not used by the selected card into the<br />

appropriate fields. Cards must have unique loop-shelf-card combinations.<br />

4 Select the phantom card from the drop-down list.<br />

<strong>Optivity</strong> <strong>Telephony</strong> <strong>Manager</strong> <strong>System</strong> <strong>Administration</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!